Your course

Pick up where you left off.

Current Status

Not Enrolled

Price

$99.00

Get Started

Course Content

I. Introduction (2 minutes)
II. Learning Objectives (1 minute)
III. Module 1: Classify the Site Before You Size Anything (11 minutes)
IV. Module 2: Where AS 4055 Stops and Engineering Starts (11 minutes)
V. Module 3: Bracing and Tie-Down Under AS 1684 (11 minutes)
VII. Case Studies (5 minutes)
VIII. Summary and Key Takeaways (2 minutes)
For building designers documenting exposed and coastal houses

Wind, Bracing and Tie-Downs on Coastal Sites

On an exposed coastal site, the wind class is the most expensive line on the sheet.

AS 4055 site classification, the N3 line, AS 1684 bracing and tie-down, and coastal corrosion, with the Tasmanian position as at November 2026. Classify the site from its own inputs, know when the simplified route stops, draw one continuous load path, and specify every metal part for the salt air.

60 minutes, self-paced Intermediate level 1 formal CPD point Certificate on completion NCC 2022 and NCC 2025
Aligned to NSCA 2021 PC12 PC26 PC39 PC45 PC46
$99 inc. GST, one-off
  • Product neutral, no supplier content
  • Audio version and glossary included
  • Certificate saved to your dashboard

Secure card checkout. Tax invoice emailed.

Course content

4 modules, 2 case studies, final quiz and certificate.

Start 3 min

Introduction and objectives

Why the wind class is a site decision with structural consequences, where acceptable construction stops, and the four objectives.

Module 1 11 min

Classify the Site Before You Size Anything

Which edition and standards apply and when, from H1P1 to a wind class, regions and the Tasmanian position, terrain category, topography and shielding.

Module 2 11 min

Where AS 4055 Stops and Engineering Starts

The geometric limits of AS 4055, the N3 line in the Housing Provisions, AS/NZS 1170.2 and the engineer, exposed sites that climb the table, and who signs.

Module 3 11 min

Bracing and Tie-Down Under AS 1684

Anchorage, bracing and continuity, the AS 1684 Parts and their limits, racking and diaphragms, uplift to the footing, openings, raking ceilings and masonry.

Module 4 11 min

Coastal Exposure, Corrosion and Documentation

Breaking surf, sheltered water and the corrosion environments, roofing and fixings, wall ties, lintels, steel and decks, connectors, and what the drawings must say.

Case studies 5 min

The headland house and the beachfront roof

An east coast headland house classified from the township below, and a beachfront roof specified as if it were inland.

Summary 2 min

Key takeaways

The checks to carry onto your next exposed or coastal house.

Finish

Final quiz and certificate

Ten scenario questions. Pass and the certificate goes straight into your dashboard.

Intermediate. For practitioners who already document houses and want to classify and detail exposed and coastal sites with confidence. Reflects NCC 2022 Amendment 2, NCC 2025, the ABCB Housing Provisions and the Tasmanian Building Act 2016 and Building Regulations 2016 as published in November 2026; AS 4055, AS/NZS 1170.2 and AS 1684 tables are described, not quoted. Confirm the edition, the wind classification and the structural design for each project with your building surveyor and, where required, a structural engineer. General professional education, not structural engineering advice.

Who it is for

Written for the people who classify, design, check and build houses on exposed sites.

Building Designer

You put the wind class, bracing and corrosion specification on the drawings.

1 formal CPD point

Architect

Your coastal houses carry glazed walls and raking ceilings that change the load path.

1 formal CPD point

Building Surveyor

You ask for the basis of the classification and the corrosion environment.

1 CPD point

Licensed Builder

You build the bracing, tie-downs and fixings the drawings call for.

1 CPD point

Structural Engineer

You see where the simplified housing route ends and your design begins.

1 CPD point
How it counts

Where this hour goes on your record.

National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:

PC12

Building codes, standards and planning advice

PC26

Site, cultural and contextual analysis

PC39

Integrating materials and construction systems

PC45

Materials and performance standards

PC46

Compliant project documentation

If you are

How it is recorded

A building designer

1 formal CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited.

An architect

1 formal CPD point. Aligned with NSCA 2021 performance criteria PC12, PC26, PC39, PC45 and PC46.

A building surveyor, licensed builder or structural engineer

1 hour of CPD on wind classification, bracing, tie-down and coastal durability, recorded on your certificate for your registration or licensing body.

CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.

  • Apply the AS 4055 method to classify a non-cyclonic house site.
  • State the edition and standards that apply, including the Tasmanian position.
  • Evaluate when AS 4055 and the Housing Provisions stop applying.
  • Analyse the bracing and tie-down load path under AS 1684.
  • Apply the coastal corrosion provisions to every metal part.
  • Document the classification, structure and corrosion decisions on the drawings.
Keep going

Pairs well with.

Building designers

How the NCC Actually Works: Structure, Responsibility & Compliance Pathways

Performance requirements, deemed-to-satisfy solutions and who decides.

Building designers

NCC 2025: What Is Changing, When It Applies to You, and How to Use Your Transition Window

Which edition applies in your state, and when.

Building designers

Livable Housing Design (NCC Part H8): Getting It Right on Tasmanian Homes

Another Tasmanian house provision, clause by clause.

Questions

Before you enrol.

Yes. Wind classification, the N3 line, bracing, tie-down and the corrosion tables are national and taught from the NCC texts, with the edition each state applies named. Tasmania adds the edition position and the frame stage notification.

Start, stop and finish later. Progress is saved and the course stays in your dashboard.

Yes, on passing the final quiz. It is stored in your dashboard alongside your other CPD records.

No. The course is about non-cyclonic N classes, Region A and Tasmania. Cyclonic regions and AS 1684 Part 3 are named only.

Yes. Team packs start at $579 for six courses shared across your practice.

No. Every course is product neutral. No connector, fixing, roofing or tie brand is named, and there is no sales pitch at the end.

Classify, brace and specify your next exposed or coastal house with confidence, in one self-paced hour.

$99, 60 minutes, certificate on completion.

$99 1 hour, certificate