Your course

Pick up where you left off.

Current Status

Not Enrolled

Price

$99.00

Get Started

Course Content

I. Introduction (2 minutes)
II. Learning Objectives (1 minute)
III. Module 1: Mass Timber Systems and Structural Design (10 minutes)
IV. Module 2: Fire Under the Deemed-to-Satisfy Provisions (14 minutes)
V. Module 3: Performance Solutions and Building Physics (12 minutes)
VII. Case Studies (5 minutes)
VIII. Summary and Key Takeaways (2 minutes)
For architects designing Class 2 to 9 buildings in timber

Mass Timber and CLT in Tasmania

Mass timber projects rarely fail on the timber. They fail on decisions made too late.

CLT, glulam and hybrid systems under NCC Volume One, with the Tasmanian position as at November 2026. Choose the system, read every condition of the fire-protected timber concession, know when a Performance Solution is needed, keep the panels dry, and procure and document the project so the carbon claim holds up.

60 minutes, self-paced Intermediate level 1 formal CPD point Certificate on completion NCC 2022 and NCC 2025
Aligned to NSCA 2021 PC12 PC39 PC41 PC43 PC45
$99 inc. GST, one-off
  • Product neutral, no supplier content
  • Audio version and glossary included
  • Certificate saved to your dashboard

Secure card checkout. Tax invoice emailed.

Course content

4 modules, 2 case studies, final quiz and certificate.

Start 3 min

Introduction and objectives

Why prefabrication locks decisions in early, why fire is the gateway question, and the four objectives.

Module 1 10 min

Mass Timber Systems and Structural Design

CLT, glulam and the engineered timber family, how CLT floors and walls behave, AS 1720 and the product standards, connections, shrinkage and hybrid structures.

Module 2 14 min

Fire Under the Deemed-to-Satisfy Provisions

The edition and Type of construction, non-combustible elements, every condition of the fire-protected timber concession, Specification 10, cavity barriers and what NCC 2025 changes.

Module 3 12 min

Performance Solutions and Building Physics

When the Deemed-to-Satisfy route runs out, building a defensible Performance Solution, light and stiff floors under Part F7, moisture during construction, durability and termites.

Module 4 11 min

Procurement, Carbon and the Tasmanian Context

Embodied carbon claims you can defend, early contractor involvement and procurement, building mass timber in Tasmania, and documenting the project.

Case studies 5 min

The Hobart apartments and the Launceston office

Hobart apartments built on the concession with the wrong sprinkler system, and a Launceston office whose panels got wet before the topping went on.

Summary 2 min

Key takeaways

The checks to carry onto your next mass timber project.

Finish

Final quiz and certificate

Ten scenario questions. Pass and the certificate goes straight into your dashboard.

Intermediate. For practitioners who already design Class 2 to 9 buildings and want to take a mass timber project from feasibility to documentation. Reflects NCC 2022 Amendment 2, NCC 2025 and the Tasmanian Building Act 2016 as published in November 2026; the referenced standards are named at their editions, and no figure is quoted from them. Confirm the edition, the Type of construction and any Performance Solution with your building surveyor, structural engineer and fire safety engineer for each project. General professional education, not legal, engineering or fire safety engineering advice.

Who it is for

Written for the people who design, check, engineer and build mass timber.

Architect

You choose the system and the fire route, and every decision you make early is built into the panels.

1 formal CPD point

Building Designer

You document mid-rise timber projects and coordinate the consultants around them.

1 formal CPD point

Building Surveyor

You check the concession conditions, encapsulation and any Performance Solution.

1 CPD point

Structural Engineer

You design the panels, connections and hybrid structure the architecture depends on.

1 CPD point

Licensed Builder

You price, sequence, protect and erect the panels on site.

1 CPD point
How it counts

Where this hour goes on your record.

National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:

PC12

Building codes, standards and planning advice

PC39

Integrating materials and construction systems

PC41

Coordinating specialists and consultants

PC43

Early contractor collaboration on methodology

PC45

Materials and performance standards

If you are

How it is recorded

An architect

1 formal CPD point. Aligned with NSCA 2021 performance criteria PC12, PC39, PC41, PC43 and PC45.

A building designer

1 formal CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited.

A building surveyor, structural engineer or licensed builder

1 hour of CPD on mass timber design, fire, building physics and procurement, recorded on your certificate for your registration or licensing body.

CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.

  • Differentiate CLT, glulam and the other mass timber products, and the standards that govern their design.
  • Apply the NCC Volume One Type of construction and fire provisions.
  • Apply every condition of the fire-protected timber concession and Specification 10 encapsulation.
  • Evaluate when a Performance Solution is needed and what makes one defensible.
  • Evaluate the acoustic, moisture, durability and termite risks of a mass timber building.
  • Develop a procurement and documentation strategy with carbon claims you can defend.
Keep going

Pairs well with.

Architects

Fire Safety in Class 2 to 9 Buildings for Architects

The fire provisions behind every larger building.

Architects

Cold-Climate Condensation and Zone 7 Envelopes for Tasmanian Architects

Envelope and moisture design for Tasmanian conditions.

Architects

The Builder Wants to Substitute a Product. What Do I Need to Check Before I Agree?

Holding the specification when the builder proposes a change.

Questions

Before you enrol.

Yes. The fire, acoustic and durability provisions are national NCC Volume One clauses, read in both NCC 2022 and NCC 2025. Tasmania adds the edition position, state policy and local supply and fabrication context.

Start, stop and finish later. Progress is saved and the course stays in your dashboard.

Yes, on passing the final quiz. It is stored in your dashboard alongside your other CPD records.

No. The course explains how the systems behave and which standards govern them, so you can brief and coordinate the engineer; it does not teach member design.

Yes. Team packs start at $579 for six courses shared across your practice.

No. Every course is product neutral. No timber product, panel, connector or lining brand is named, and there is no sales pitch at the end.

Take your next mass timber project from feasibility to documentation with confidence, in one self-paced hour.

$99, 60 minutes, certificate on completion.

$99 1 hour, certificate