Your course

Pick up where you left off.

Current Status

Not Enrolled

Price

$99.00

Get Started

Course Content

I. Introduction (2 minutes)
II. Learning Objectives (1 minute)
III. Module 1: When the Act Applies (11 minutes)
IV. Module 2: Forming the Contract (11 minutes)
V. Module 3: Deposits, Progress Payments and Variations (11 minutes)
VI. Module 4: Completion, Warranties and Disputes (11 minutes)
VII. Case Studies (4 minutes)
VIII. Summary and Key Takeaways (2 minutes)
For builders, designers and architects on Tasmanian residential work

Residential Building Contracts in Tasmania

Most residential disputes start with paperwork that was never done.

Residential building contracts in Tasmania under the 2016 Act and the 2026 Regulations, as at November 2026. Test whether a job is in scope, build a contract that meets section 14 and the Director’s mandatory provisions, keep deposits, progress claims and variations inside the Act, and follow a dispute from the notice to mediation and the Tribunal.

60 minutes, self-paced Intermediate level 1 formal CPD point Certificate on completion Tasmania, 2026 Regulations
Aligned to NSCA 2021 PC1 PC9 PC16 PC57 PC58
$99 inc. GST, one-off
  • Product neutral, no supplier content
  • Audio version and glossary included
  • Certificate saved to your dashboard

Secure card checkout. Tax invoice emailed.

Course content

4 modules, 2 case studies, final quiz and certificate.

Start 3 min

Introduction and objectives

Who the Act reaches, the three patterns behind most disputes, and the four objectives.

Module 1 11 min

When the Act Applies

Building class, the kind of work, the $20,000 line and split contracts, who the Act binds, no contracting out, and the scale of penalties.

Module 2 11 min

Forming the Contract

Written, signed and copied within five business days, the section 14 contents, the Director’s mandatory provisions, prime cost items and provisional sums, the consumer guide and cooling-off.

Module 3 11 min

Deposits, Progress Payments and Variations

The 5, 10 and 20 per cent deposit caps, progress payments tied to work on site, variations written before the work, and variations that need the surveyor or a permit.

Module 4 11 min

Completion, Warranties and Disputes

Commencement and practical completion notices, the defects document, the statutory warranties at a glance, the notice of dispute, mediation and the Tribunal.

Case studies 4 min

The Huon Valley frames and the Kingston deck

A deposit and a frame claim taken on factory-built frames, and a deck enlarged on site without a signed variation or the surveyor’s consent.

Summary 2 min

Key takeaways

The checks to carry onto your next Tasmanian residential contract.

Finish

Final quiz and certificate

Ten scenario questions. Pass and the certificate goes straight into your dashboard.

Intermediate. For practitioners who contract for, document or administer residential building work in Tasmania. Reflects the Residential Building Work Contracts and Dispute Resolution Act 2016 and the Residential Building Work Contracts and Dispute Resolution Regulations 2026, in force from 2 November 2026, and the Director’s determinations, as published in November 2026. General professional education, not legal advice: have your contract template and any dispute strategy reviewed by your own lawyer, and check the current determinations with Building Standards Tasmania.

Who it is for

Written for the people who sign, document and administer residential building contracts.

Builder

You sign the contract, take the deposit, claim the stages and write the variations the Act controls.

1 CPD point

Building Designer

Your drawings and allowances become contract documents, and a design and construct package makes you the building contractor.

1 formal CPD point

Architect

You document the work and often administer the contract for the owner, including every scope instruction.

1 formal CPD point

Construction Manager

You run the programme, the progress claims and the completion paperwork the Tribunal will read.

1 CPD point

Practice Manager

You own the contract template, the payment schedule and the variation form the whole team uses.

1 CPD point
How it counts

Where this hour goes on your record.

National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:

PC1

Regulatory obligations and professional conduct

PC9

Building procurement methods

PC16

Risk management and climate resilience

PC57

Progress claims, variations and extensions of time

PC58

Documentation, certification and approvals

If you are

How it is recorded

An architect

1 formal CPD point. Aligned with NSCA 2021 performance criteria PC1, PC9, PC16, PC57 and PC58.

A building designer

1 formal CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited.

A builder, construction manager or practice manager

1 hour of CPD on residential building contracts, payments, variations and disputes in Tasmania, recorded on your certificate for your licensing body.

CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.

  • Examine whether a Tasmanian residential job falls within the Act.
  • Apply the Act’s rules for forming and documenting the contract.
  • Fix the receipt day so the cooling-off period starts on a day you can prove.
  • Evaluate deposits, progress claims and variations against the Act.
  • Identify variations that need the building surveyor’s consent or a permit.
  • Analyse completion duties and the path from notice of dispute to the Tribunal.
Keep going

Pairs well with.

Business

Contracts & Risk Management for Architects and Designers

Contract and risk management across your practice.

Architects

How Do I Get Paid for the Extra Work the Client Keeps Asking For?

Scope change and variations on the design side.

Business

Presenting Design Value So You Stop Competing on Price

Pricing and fee conversations with clients.

Questions

Before you enrol.

No. The scope tests, deposit caps, variation rules and dispute pathway are taught for the Tasmanian Act and its 2026 Regulations; other states have their own home building legislation.

Start, stop and finish later. Progress is saved and the course stays in your dashboard.

Yes, on passing the final quiz. It is stored in your dashboard alongside your other CPD records.

No. The warranties are covered on one overview slide; how they work with defective work orders and defect liability is covered in a separate course in the Business range.

Yes. Team packs start at $579 for six courses shared across your practice.

No. Every course is product neutral. No standard form contract or supplier is named, and there is no sales pitch at the end.

Take your next Tasmanian residential contract from enquiry to final defect with a file that answers the questions, in one self-paced hour.

$99, 60 minutes, certificate on completion.

$99 1 hour, certificate