Pick up where you left off.
Course Content
Mass Timber and CLT in Tasmania
Mass timber projects rarely fail on the timber. They fail on decisions made too late.
CLT, glulam and hybrid systems under NCC Volume One, with the Tasmanian position as at November 2026. Choose the system, read every condition of the fire-protected timber concession, know when a Performance Solution is needed, keep the panels dry, and procure and document the project so the carbon claim holds up.
Secure card checkout. Tax invoice emailed.
4 modules, 2 case studies, final quiz and certificate.
Introduction and objectives
Why prefabrication locks decisions in early, why fire is the gateway question, and the four objectives.
Mass Timber Systems and Structural Design
CLT, glulam and the engineered timber family, how CLT floors and walls behave, AS 1720 and the product standards, connections, shrinkage and hybrid structures.
Fire Under the Deemed-to-Satisfy Provisions
The edition and Type of construction, non-combustible elements, every condition of the fire-protected timber concession, Specification 10, cavity barriers and what NCC 2025 changes.
Performance Solutions and Building Physics
When the Deemed-to-Satisfy route runs out, building a defensible Performance Solution, light and stiff floors under Part F7, moisture during construction, durability and termites.
Procurement, Carbon and the Tasmanian Context
Embodied carbon claims you can defend, early contractor involvement and procurement, building mass timber in Tasmania, and documenting the project.
The Hobart apartments and the Launceston office
Hobart apartments built on the concession with the wrong sprinkler system, and a Launceston office whose panels got wet before the topping went on.
Key takeaways
The checks to carry onto your next mass timber project.
Final quiz and certificate
Ten scenario questions. Pass and the certificate goes straight into your dashboard.
Intermediate. For practitioners who already design Class 2 to 9 buildings and want to take a mass timber project from feasibility to documentation. Reflects NCC 2022 Amendment 2, NCC 2025 and the Tasmanian Building Act 2016 as published in November 2026; the referenced standards are named at their editions, and no figure is quoted from them. Confirm the edition, the Type of construction and any Performance Solution with your building surveyor, structural engineer and fire safety engineer for each project. General professional education, not legal, engineering or fire safety engineering advice.
Written for the people who design, check, engineer and build mass timber.
Architect
You choose the system and the fire route, and every decision you make early is built into the panels.
Building Designer
You document mid-rise timber projects and coordinate the consultants around them.
Building Surveyor
You check the concession conditions, encapsulation and any Performance Solution.
Structural Engineer
You design the panels, connections and hybrid structure the architecture depends on.
Licensed Builder
You price, sequence, protect and erect the panels on site.
Where this hour goes on your record.
National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:
Building codes, standards and planning advice
Integrating materials and construction systems
Coordinating specialists and consultants
Early contractor collaboration on methodology
Materials and performance standards
| If you are | How it is recorded |
|---|---|
| An architect | 1 formal CPD point. Aligned with NSCA 2021 performance criteria PC12, PC39, PC41, PC43 and PC45. |
| A building designer | 1 formal CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited. |
| A building surveyor, structural engineer or licensed builder | 1 hour of CPD on mass timber design, fire, building physics and procurement, recorded on your certificate for your registration or licensing body. |
CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.
Pairs well with.
Fire Safety in Class 2 to 9 Buildings for Architects
The fire provisions behind every larger building.
Cold-Climate Condensation and Zone 7 Envelopes for Tasmanian Architects
Envelope and moisture design for Tasmanian conditions.
The Builder Wants to Substitute a Product. What Do I Need to Check Before I Agree?
Holding the specification when the builder proposes a change.
Before you enrol.
Take your next mass timber project from feasibility to documentation with confidence, in one self-paced hour.
$99, 60 minutes, certificate on completion.