Your course

Pick up where you left off.

Current Status

Not Enrolled

Price

$99.00

Get Started

Course Content

I. Introduction (2 minutes)
II. Learning Objectives (2 minutes)
IV. Module 2: What Lead-Free Actually Requires (11 minutes)
VI. Module 4: Specifying to Stay Compliant (11 minutes)
VII. Case Studies (4 minutes)
VIII. Summary & Key Takeaways (2 minutes)
For architects, building designers and licensed builders

NCC 2025 Residential: The Plumbing Spec That Could Make Your Documents Non-Compliant Overnight

The tapware schedule you trust may have turned non-compliant on 1 May 2026 without a word changing.

Victoria’s lead-free requirement for products in contact with drinking water, operative since 1 May 2026, and what it does to the documents you issue. What VIC A5G4, AS/NZS 4020 and a WaterMark Licence require, where a non-compliant product hides in schedules, specifications and prime cost items, and how to specify and verify so every line holds up.

60 minutes, self-paced Intermediate level 1 formal CPD point Certificate on completion Victoria, NCC 2025
Aligned to NSCA 2021 PC1 PC12 PC16 PC45 PC47
$99 inc. GST
  • Product neutral, no supplier content
  • Audio version and glossary included
  • Certificate saved to your dashboard

Secure card checkout. Tax invoice emailed.

Course content

4 modules, 2 case studies, final quiz and certificate.

Start 4 min

Introduction and objectives

Who the course is for, the specification risk it addresses, and the four objectives for the hour.

Module 1 11 min

Why a Plumbing Spec Can Make Your Documents Non-Compliant Overnight

See what went operative in Victoria on 1 May 2026, why the product you name is your exposure, and how a carried-forward schedule crosses the line.

Module 2 11 min

What Lead-Free Actually Requires

Judge a single product against VIC A5G4: AS/NZS 4020, the 0.25% weighted average lead limit, and the WaterMark Licence that can evidence both.

Module 3 13 min

Where Non-Compliance Hits Your Documents and Surfaces

Check the tapware schedule, specification and prime cost items, and see why a line caught before issue costs a fraction of one found at certification.

Module 4 11 min

Specifying to Stay Compliant

Name the exact model, verify the licence rather than the brochure, put a compliance condition on any equivalent and record who confirms each product.

Case studies 4 min

A carried-forward schedule and a substitution

A trusted tapware schedule caught by a plumber’s query, and an unconditioned substitution flagged near completion.

Summary 2 min

Key takeaways

Four takeaways to carry into your next document set.

Finish

Final quiz and certificate

Ten scenario questions. Pass and the certificate goes straight into your dashboard.

Intermediate. For architects and building designers who specify tapware and fittings on Class 1 homes in Victoria. Covers the lead-free requirement under VIC A5G4, AS/NZS 4020 and WaterMark evidence, where non-compliant products sit in your documents, and how to specify and verify. Installation stays with the licensed plumber, and it is not legal advice.

Who it is for

Written for everyone who names, installs or checks a drinking-water fitting.

Architects

You name tapware and fittings in schedules that may predate the lead-free requirement.

1 formal CPD point

Building designers

You carry a trusted fixture schedule from job to job, and a mixer on it may no longer comply.

1 CPD point, with audit-ready records

Licensed builders

You order and install from the schedule, and a non-compliant line or substitution costs you at rough-in.

1 hour of CPD

Building surveyors

You certify the installed work and trace a non-compliant product back through the issued documents.

1 hour of CPD

Plumbing consultants

You coordinate drinking-water products and need clear lines on who confirms each one complies.

1 hour of CPD
How it counts

Where this hour goes on your record.

National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:

PC1

Regulatory obligations of practice as an architect

PC12

Advice in line with building codes and standards

PC16

Risk management and mitigation

PC45

Performance standards for materials, fittings and systems

PC47

Accurate, on-time documents for stakeholders

If you are

How it is recorded

An architect

1 formal CPD point. Aligned with NSCA 2021 performance criteria PC1, PC12, PC16, PC45 and PC47.

A building designer

1 CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited.

A licensed builder, building surveyor or plumbing consultant

1 hour of CPD on Victoria’s lead-free plumbing requirement and compliant specification, recorded on your certificate for your registration body or state scheme.

CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.

  • Explain how the NCC 2025 lead free plumbing requirements affect residential design documentation in Victoria.
  • Locate potential compliance risks within schedules, specifications, and prime cost allowances.
  • Identify plumbing products that must comply with lead free and drinking water requirements.
  • Evaluate how substitutions, carried forward schedules, and outdated specifications can create non compliant documentation.
  • Assess whether specified products meet lead free and WaterMark compliance requirements.
  • Apply practical specification and verification processes to produce compliant residential project documents.
Keep going

Pairs well with.

Building designers

NCC 2025 Residential: The Documentation Changes That Will Get Your Designs Rejected

The wider evidence rules under Part A5 that your product selections sit inside.

Building designers

NCC 2025 Residential: The Compliance Gaps That Create Professional Risk

Lead-free plumbing among the other NCC 2025 gaps that trace back to the designer.

Building designers

The Waterproofing Time Bomb: Defending High-Risk Balconies and Podiums Under the New Water Management Provisions

Another NCC 2025 change where a detail carried forward no longer complies.

Questions

Before you enrol.

It is written for Victoria, where the lead-free requirement for products in contact with drinking water has applied since NCC 2025 was adopted on 1 May 2026, through the Victorian provision VIC A5G4. Other states and territories set their own plumbing adoption dates and arrangements: South Australia adopted the NCC 2025 Plumbing Code on 1 May 2026, while New South Wales, Queensland and Tasmania move to NCC 2025 on 1 May 2027. Check with your state plumbing regulator before applying the Victorian rules elsewhere.

Start, stop and finish later. Progress is saved and the course stays in your dashboard.

Yes, on passing the final quiz. It is stored in your dashboard alongside your other CPD records.

No. Installation and the compliance of products as fitted belong to the licensed plumber and the certifier. The course covers the designer’s side: the products you name in schedules, specifications and prime cost items, and how to verify and specify them.

Yes. Team packs start at $579 for six courses shared across your practice.

No. Every course is product neutral. No tapware, mixer or fitting brands, no sponsor, no sales pitch at the end.

Keep every drinking-water product you specify compliant in Victoria, in one self-paced hour.

$99, 60 minutes, certificate on completion.

$99 1 hour, certificate