Your course

Pick up where you left off.

Current Status

Not Enrolled

Price

$99.00

Get Started

Course Content

I. Introduction (2 minutes)
II. Learning Objectives (2 minutes)
VII. Case Studies (4 minutes)
VIII. Summary & Key Takeaways (2 minutes)
For architects, building designers and building surveyors

NCC 2025 Residential: The Documentation Changes That Will Get Your Designs Rejected

The design was sound, yet the set came back marked up: under NCC 2025 the evidence has to prove it.

What NCC 2025 changed for documenting Class 1 homes in Victoria, and why sound designs are still rejected at assessment. Assemble evidence of suitability that survives Part A5, take a Performance Solution through the A2G2 process to a final report with all five mandatory elements, and audit your set the way a surveyor will read it before you lodge.

60 minutes, self-paced Intermediate level 1 formal CPD point Certificate on completion Victoria, NCC 2025
Aligned to NSCA 2021 PC12 PC13 PC16 PC45 PC46
$99 inc. GST
  • Product neutral, no supplier content
  • Audio version and glossary included
  • Certificate saved to your dashboard

Secure card checkout. Tax invoice emailed.

Course content

4 modules, 2 case studies, final quiz and certificate.

Start 4 min

Introduction and objectives

Who the course is for, the gap between designing well and demonstrating well, and the four objectives for the hour.

Module 1 10 min

Why Designs Get Rejected: The NCC 2025 Documentation Shift in Victoria

See what changed for Victorian Class 1 work on 1 May 2026, the two compliance pathways, and the four places rejections actually start.

Module 2 10 min

Evidence of Suitability: What Survives Part A5 Scrutiny

Rank the evidence forms under A5G3, know the limits of a Product Technical Statement, and close the appropriateness, completeness and traceability gaps.

Module 3 12 min

Performance Solutions Surveyors Accept: The A2G2 Process

Take a Performance Solution from design brief to a five-element final report, and know the structural materials route that closes in Victoria on 1 May 2027.

Module 4 10 min

Building a Rejection-Proof Documentation Set

Map the set to the provisions assessed, talk to the surveyor before lodgement and run a four-question audit on your own set.

Case studies 4 min

A cladding solution and an evidence audit

A proprietary cladding Performance Solution rejected and then accepted, and a sound design rescued by a cold pre-lodgement audit.

Summary 2 min

Key takeaways

Four takeaways to carry back to your desk and your next lodgement.

Finish

Final quiz and certificate

Ten scenario questions. Pass and the certificate goes straight into your dashboard.

Intermediate. For architects and building designers who already document Class 1 homes in Victoria. Covers Part A5 evidence of suitability, the A2G2 Performance Solution process and final report, and a pre-lodgement audit of the documentation set. It is not a clause by clause guide to the NCC 2025 technical changes.

Who it is for

Written for the people whose documents have to prove the design complies.

Architects

You document Class 1 homes in Victoria and have had a set come back asking for evidence you thought was there.

1 formal CPD point

Building designers

You prepare your own compliance material, and every resubmission is unbillable time on a fee already spent.

1 CPD point, with audit-ready records

Building surveyors

You assess evidence and Performance Solution reports that arrive incomplete, mismatched or without a design brief.

1 hour of CPD

Residential building consultants

You coordinate the reports and certificates that have to line up with the drawings before lodgement.

1 hour of CPD

Compliance and certification professionals

You check evidence of suitability against Part A5 and need it appropriate, complete and traceable.

1 hour of CPD
How it counts

Where this hour goes on your record.

National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:

PC12

Advice in line with building codes and standards

PC13

Documentation processes through all project stages

PC16

Risk management and mitigation

PC45

Performance standards for materials, fittings and systems

PC46

Documentation that complies with codes and approvals

If you are

How it is recorded

An architect

1 formal CPD point. Aligned with NSCA 2021 performance criteria PC12, PC13, PC16, PC45 and PC46.

A building designer

1 CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited.

A building surveyor, residential building consultant or compliance professional

1 hour of CPD on NCC 2025 documentation and evidence for Class 1 homes in Victoria, recorded on your certificate for your registration body or state scheme.

CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.

  • Explain the key NCC 2025 documentation and compliance changes affecting Class 1 residential projects in Victoria.
  • Apply the A2G2 Performance Solution process to develop compliant and surveyor ready assessment reports.
  • Identify the most common documentation and evidence deficiencies that lead to permit assessment rejections.
  • Assess residential documentation sets against common rejection triggers and implement effective quality control measures.
  • Evaluate evidence of suitability under Part A5 and determine whether documentation is appropriate, complete, and traceable.
  • Create structured compliance documentation that improves approval outcomes, reduces rework, and minimises project delays.
Keep going

Pairs well with.

Building designers

NCC 2025 Residential: The Compliance Gaps That Create Professional Risk

What happens after assessment: the gaps that surface at inspection, occupancy or in a dispute.

Building designers

NCC 2025 Residential: The Plumbing Spec That Could Make Your Documents Non-Compliant Overnight

The lead-free plumbing rule that can make a trusted fixture schedule non-compliant.

Building designers

Getting NatHERS Right Before It Goes to the Assessor

The energy information in the same set, right before it is assessed.

Questions

Before you enrol.

It is written for Class 1 homes in Victoria, where NCC 2025 has applied since 1 May 2026. A building surveyor may still allow NCC 2022 where design was substantially progressed before that date, so confirm the edition for each project. Elsewhere the dates differ: Western Australia adopted NCC 2025 on 1 May 2026 with BCA 2022 still available until 30 April 2027, and the ACT commenced it on 1 May 2026 with a transition to 1 May 2027. New South Wales, Queensland and South Australia stay on NCC 2022 for building work until 1 May 2027, Tasmania paused NCC 2025 and is due to adopt it on 1 May 2027, and the Northern Territory has set no date. Victorian variations apply only in Victoria.

Start, stop and finish later. Progress is saved and the course stays in your dashboard.

Yes, on passing the final quiz. It is stored in your dashboard alongside your other CPD records.

Only where they drive the evidence. The course is about demonstrating compliance: evidence of suitability under Part A5, the A2G2 Performance Solution process and a set a surveyor can read. For where gaps open in condensation, energy and livable housing, take The Compliance Gaps That Create Professional Risk.

Yes. Team packs start at $579 for six courses shared across your practice.

No. Every course is product neutral. No cladding, membrane or certification body brands, no sponsor, no sales pitch at the end.

Lodge a documentation set that proves your design complies, in one self-paced hour.

$99, 60 minutes, certificate on completion.

$99 1 hour, certificate