Pick up where you left off.
Course Content
Insulation Documentation That Gets Approved: What Reviewers Actually Look For
Insulation is on every set of drawings, and it is still one of the most common reasons for an RFI.
What reviewers actually look for in insulation documentation. Where the insulation requirements sit in NCC 2022 Volumes One and Two and the Housing Provisions, how designers, energy assessors and certifiers each read your drawings, schedules and specifications, and how to show location, type and R-value so the job is approved the first time.
Secure card checkout. Tax invoice emailed.
4 modules, 3 case studies, final quiz and certificate.
Introduction and objectives
Why insulation draws so many RFIs, and how it is assessed at design, energy assessment and certification.
Where Insulation Sits in the NCC and Why It Matters
Find the provisions in Volume Two Part H6, Volume One Section J and Housing Provisions Part 13.2, and tell a Performance Requirement from a Deemed-to-Satisfy Provision.
How Insulation Documentation Is Actually Reviewed
Read your documents the way a designer, an energy assessor, a certifier and an installer each do, and give each one what they need.
Insulation Documentation That Gets Approved the First Time
Show location, type and R-value consistently across sections, junction details, schedules and NatHERS inputs.
Deemed-to-Satisfy vs Performance Solutions for Insulation
Know when insulation leaves the Deemed-to-Satisfy route, and what a Performance Solution then has to document.
What Reviewers Flag in Practice
Incomplete wall insulation on a house, NatHERS and drawings that disagree on a multi-residential job, and a builder substitution on site.
Key takeaways
How thinking like a reviewer changes your documents, and what to apply on the projects on your desk now.
Final quiz and certificate
Ten questions on where the provisions sit, how reviewers read your documents and which pathway applies. Pass and the certificate goes straight into your dashboard.
Beginner to intermediate. For people who prepare or review insulation documentation on houses and multi-residential buildings. Covers where the NCC 2022 insulation provisions sit, how each reviewer assesses the documents, what approved documentation shows, and Deemed-to-Satisfy against Performance Solution pathways. It does not teach NatHERS modelling, and condensation design is only touched on.
Written for everyone whose name is on the insulation documentation, or whose sign-off depends on it.
Architects
You coordinate drawings, specifications and the energy report, and one R-value that differs between them stops the approval.
Building designers
You draw the sections and schedules a certifier checks, and generic insulation notes come straight back as RFIs.
Energy assessors
You model what the drawings show, and missing insulation details force conservative assumptions into the rating.
Building surveyors
You compare drawings, schedules and energy reports for consistency before you can approve the thermal envelope.
Licensed builders
You install to the approved documents, and an unapproved substitution can mean reassessment before certification.
Where this hour goes on your record.
National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:
Advice under building codes and standards
Energy, water and carbon over the project lifecycle
Integrating thermal and other environmental systems
Performance standards for materials and systems
Documentation that complies with codes
| If you are | How it is recorded |
|---|---|
| A building designer | 1 CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited. |
| An architect | 1 formal CPD point. Aligned with NSCA 2021 performance criteria PC12, PC31, PC33, PC45 and PC46. |
| An energy assessor, building surveyor or builder | 1 hour of CPD on insulation documentation under NCC 2022, recorded on your certificate for your accreditation body, registration body or state scheme. |
CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.
Pairs well with.
Getting NatHERS Right Before It Goes to the Assessor
The next step: drawings an assessor can model without guessing.
The Breathable Wall: Understanding Condensation Risks in NCC 2025
Where insulation meets moisture: cavities, membranes and condensation.
Non-Conforming Building Products: Specification Risk, Evidence of Suitability, and Documentation Defence for Building Designers
Evidence of suitability and substitutions, the other half of an approvable specification.
Before you enrol.
Document insulation the way reviewers read it, and get it approved the first time.
$99, 60 minutes, certificate on completion.