Your course

Pick up where you left off.

Current Status

Not Enrolled

Price

$99.00

Get Started

Course Content

I. Introduction (2 minutes)
II. Learning Objectives (2 minutes)
VII. Case Studies (5 minutes)
VIII. Summary & Key Takeaways (2 minutes)
For architects, building designers and building surveyors

NCC 2025 Residential: The Compliance Gaps That Create Professional Risk

The gap nobody saw at permit stage can surface at occupancy, and trace straight back to your documents.

Where compliance gaps open on Class 1 homes in Victoria under NCC 2025, and how they trace back to the designer. Condensation, the moisture envelope, energy, livable housing and lead-free plumbing; where each gap surfaces, from permit and inspection to occupancy and a dispute years later; and the scope, records and handover practices that keep responsibility where it belongs.

60 minutes, self-paced Intermediate level 1 formal CPD point Certificate on completion Victoria, NCC 2025
Aligned to NSCA 2021 PC6 PC12 PC13 PC16 PC47
$99 inc. GST
  • Product neutral, no supplier content
  • Audio version and glossary included
  • Certificate saved to your dashboard

Secure card checkout. Tax invoice emailed.

Course content

4 modules, 2 case studies, final quiz and certificate.

Start 4 min

Introduction and objectives

Who the course is for, the change you did not see under NCC 2025, and the four objectives for the hour.

Module 1 12 min

How Compliance Gaps Create Professional Risk

Tell a compliance gap from a design flaw, follow the responsibility chain, and see how a silent record lets a gap migrate to you.

Module 2 12 min

The NCC 2025 Residential Changes That Create Gaps

Find where gaps open in condensation under Part 10.8, the moisture envelope, 7 star and Whole of Home energy, livable housing and lead-free plumbing.

Module 3 14 min

Where Gaps Surface and Crystallise Into Liability

Know how a gap behaves at the permit, at mandatory inspections, at occupancy and years later in a dispute, and how responsibility is traced.

Module 4 11 min

Containing Your Liability: Scope, Documentation, and Handover

Record scope before a gap forms, keep a decision trail made at the time, hand over on the record and run a routine on every project.

Case studies 5 min

A condensation gap and a scope dispute

A carried-forward wall detail that surfaced at occupancy, and an undetailed shower junction that became a defect dispute.

Summary 2 min

Key takeaways

Four takeaways to carry into your next project.

Finish

Final quiz and certificate

Ten scenario questions. Pass and the certificate goes straight into your dashboard.

Intermediate. For architects and building designers who document Class 1 homes in Victoria. Covers how compliance gaps form, the NCC 2025 provisions where they open, where they surface from permit to dispute, and how scope, records and handover contain them. It is risk management education, not legal advice.

Who it is for

Written for everyone whose name is on a Class 1 home after handover.

Architects

Your finished Class 1 projects can come back to you at occupancy, or a year after handover.

1 formal CPD point

Building designers

You carry details forward from job to job, and some of them no longer meet NCC 2025.

1 CPD point, with audit-ready records

Building surveyors

You see the gaps at inspection and occupancy that the permit documents never addressed.

1 hour of CPD

Licensed builders

You build to the documents, and when they are silent the dispute lands between you and the designer.

1 hour of CPD

Compliance consultants

You review documentation for the gaps that turn into someone’s liability after handover.

1 hour of CPD
How it counts

Where this hour goes on your record.

National Standard of Competency for Architects (NSCA 2021) performance criteria this course aligns with:

PC6

Reporting and varying the scope of services

PC12

Advice in line with building codes and standards

PC13

Documentation processes through all project stages

PC16

Risk management and mitigation

PC47

Accurate, on-time documents for stakeholders

If you are

How it is recorded

An architect

1 formal CPD point. Aligned with NSCA 2021 performance criteria PC6, PC12, PC13, PC16 and PC47.

A building designer

1 CPD point. Your certificate, the learning outcomes, the module outline and your quiz result are kept in your dashboard, so you can show what you studied if your CPD is audited.

A building surveyor, licensed builder or compliance consultant

1 hour of CPD on NCC 2025 compliance gaps and professional risk for Class 1 homes in Victoria, recorded on your certificate for your registration body or state scheme.

CPD On Demand is not a registered training organisation and courses are not accredited by any registration body. Each course is aligned with the relevant competency frameworks and gives you the records to evidence it. CPD rules differ by registration body and state, so check with yours if you are unsure.

  • Explain how compliance gaps arise in residential projects and how they can create professional risk.
  • Determine where compliance gaps are most likely to surface during certification, inspections, occupancy, and post-handover disputes.
  • Identify the NCC 2025 residential provisions most likely to create compliance gaps in Victorian Class 1 housing.
  • Evaluate how responsibility is traced through project documentation and allocated across the project team.
  • Analyse how condensation, moisture management, energy performance, and livable housing requirements can expose designers to liability.
  • Apply practical strategies for defining scope, documenting decisions, and managing handovers to reduce professional risk.
Keep going

Pairs well with.

Building designers

NCC 2025 Residential: The Documentation Changes That Will Get Your Designs Rejected

The step before: a documentation set and evidence that get through assessment the first time.

Building designers

NCC 2025 Residential: The Plumbing Spec That Could Make Your Documents Non-Compliant Overnight

One of the gaps in depth: lead-free plumbing and the fixture schedule.

Building designers

The Breathable Wall: Understanding Condensation Risks in NCC 2025

The condensation provisions behind the most common new gap, in detail.

Questions

Before you enrol.

It is written for Class 1 homes in Victoria, where NCC 2025 has applied since 1 May 2026. A building surveyor may still allow NCC 2022 where design was substantially progressed before that date, so confirm the edition for each project. Elsewhere the dates differ: Western Australia adopted NCC 2025 on 1 May 2026 with BCA 2022 still available until 30 April 2027, and the ACT commenced it on 1 May 2026 with a transition to 1 May 2027. New South Wales, Queensland and South Australia stay on NCC 2022 for building work until 1 May 2027, Tasmania paused NCC 2025 and is due to adopt it on 1 May 2027, and the Northern Territory has set no date. Victorian variations apply only in Victoria.

Start, stop and finish later. Progress is saved and the course stays in your dashboard.

Yes, on passing the final quiz. It is stored in your dashboard alongside your other CPD records.

No. It is risk management education. Responsibility for a compliance issue is settled by the contract, statutory obligations, your scope of services and the facts of the project, so take legal advice on a live dispute.

Yes. Team packs start at $579 for six courses shared across your practice.

No. Every course is product neutral. No membrane, glazing, tapware or software brands, no sponsor, no sales pitch at the end.

Find the compliance gaps before they find you, in one self-paced hour.

$99, 60 minutes, certificate on completion.

$99 1 hour, certificate